BikeWing trailer hitch bike rack

For a while now, I’ve been trying to come up with a good way to transport two bikes in addition to my camper. One of the first things I tried was a hitch attached bike rack from Curt that used a spring loaded mechanism to hold it to the hitch post. As I stated in my review, it was somewhat lacking, and I haven’t really used it much since my initial outings.

We’ve also tried just putting the bikes inside the trailer, but that involves laying the bikes on top of each other, and if we wanted to access the bikes on a long trip, it would mean having to jack up the trailer and open it back up again. Also, laying the bikes on top of each other isn’t really something I like doing often. So it was back to the drawing board.

Then I came across the BikeWing bike rack which looks like it solved all of my problems. It’s a large v-shaped piece of metal that attaches to the hitch post, and you attach the bikes to the hooks on the V. I decided to order one up and check it out. I arrived I got it all set up.

First off, installation was dirt simple. Just some simple tools (that you probably own if you own a trailer) so secure the mounting post to the hitch. The four bolts that hold it down are very secure, and it feels incredibly solid. It was then time to assemble the V portion of the rack. This took a bit more fiddling, but once you understood what each part does, it wasn’t difficult at all. The nice thing is that many of the components just use lock pins, meaning that you can take the entire thing apart really easily for storage.

Once I had it assembled I grabbed my bikes, and came across my first problem. I had mounted the rack towards the back of the hitch, and it meant that the bikes bumped into the battery that is stored there. Thankfully, the product comes with an extender that lifts the rack higher, and angles it in one direction or another. However, it still wasn’t tall enough to get over the battery, so I reversed it and directed the rack the other way, moving it closer to the end of the hitch where it attaches to the car.

The next issue is that it’s apparent that this rack was designed for bikes that have a flat-bar design. Trying to get the drop bar handlebars on our two gravel bikes to line up appropriately was an exercise in frustration. I managed to get them on, but it wasn’t pretty or easy. Feeling frustrated I put the whole thing away for a while and decided to come back at it the next day.

In thinking about the problem overnight I decided to try something different. First, I moved the mount point from the back of the hitch to closer up front. That meant I could use the extender to push the rack closer to the trailer, but not so close that it interfered with the battery.

Second, I loosened the handlebar bolts and rotated the handlebars to the side. This got them out of the way of interfering with each other, and it’s a simple process to lock them down again when you take the bikes off. It’s an additional step I was hoping not to have to take, but the solution is simple enough.

Once I had done this I got both bikes mounted with minimal difficulty and the rack appeared to be far enough away from the car to not interfere with cornering. The real test will be an actual trip.

This past weekend we headed to Kilen Woods State Park, and even though we were only planning a short trip, we brought the bikes along anyway. I loosened the handlebars and rotated them to the side, and mounted each bike on the frame. It took a bit of fiddling to get all of the attachment points in just the right spot, but once I did, everything locked down secure. The only issue I ran in to was that things were a bit tight with the racks on our bikes. It still all fit, but it was snug.

Once loaded we headed out for a 3 hour trip. Although there appeared to be a fair amount of sway in the arms of the “V”, the actual rack components stayed put, and were solid the entire time. The bars that the bikes are attached to comes with padding that helps ensure your bike don’t bang around too much. When we arrived to our destination, it appeared that everything worked as advertised.

On Saturday I pulled the bikes off the rack and we did a short ride. It didn’t take very long at all to get them set back up, just tightening a couple of bolts. Putting them back on the race was also pretty simple. The entire process only took 5-10 minutes total.

Even though it’s only been one trip, I’m feeling pretty good about the Bikewing. It does what it’s advertised to do, and aside from dealing with the drop bars, it was simple and easy to work with. We got our bikes to and from our campsite with no issues, however, I do think a future purchase will be a cover for each bike for during travel. A lot of dirt and grit gets kicked up from behind the car, and some protection would be good.

It’s taken quite a while, but I think I’ve finally found something that will work well for our needs. Additionally, if we every upgrade our trailer, there’s a different mounting system that works with A-frame style hitches, so I’d just need to swap out that one part, and could continue to use the wing. If you’ve got a trailer and are struggling with how to transport your bikes, this is certainly something to check out.